The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.
 
Features
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
Fully manual operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chainIncludes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
 
Smart Styling
Audio Aesthetics
The LPW40WN was designed to give you optimal high-fidelity audio reproduction with smart styling.
 
Optimal High-fidelity Audio Reproduction
Stylish Wood Turntable
A stunning addition to any system, the AT-LPW40WN features an anti-resonance plinth with simulated walnut wood veneer to limit low-frequency acoustic feedback.
 
Cartridge Assembly Line circa 1962
Over 55 Years of Analog Excellence
We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.
 
Specifications
Type:
Belt-drive manual turntable
Motor:
DC servo with Active Speed Stabilization
Drive Method:
Belt Drive
Speeds:
33-1/3RPM, 45RPM
Turntable Platter:
Die-cast Aluminum
Wow and Flutter:
<0.15% WRMS (33RPM) at 3kHz
Singal-to-noise Ratio:
>60dB
Output Level:
Pre-amp "PHONO": 4.0mV nominal at 1kHz, 5cm/sec
Pre-amp "LINE": 200mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain:
35dB nominal, RIAA equalized
Power Requirements:
100-240V, 50/60Hz, 0.5A Max.
Dimensions:
420mm (16.53") W x 340mm (13.38") D x 116.9mm (4.6") H
Weight:
4.72kg (10.4lbs) without dust cover
Included Accessories:
Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge, 45-RPM adapter, RCA audio cable (approx. 1m (3.3')), AC adapter (approx. 1.5m (4.9'))(AD-SA1205WE)< Dust cover hinges.