From digital to analog, the DAC-Z10 lets music unfold in its purest form
A DAC that reveals the authentic character and finest details of sound
 
Full Isolation Design
Eversolo FIA™
The DAC-Z10 is built on Eversolo’s Fully Isolated Architecture (FIA), which completely separates the digital and analog domains to minimize interference and preserve signal purity. Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment. Its decoding architecture features two sets of AK4191 + AK4499 DACs for independent left and right channels, combined with a fully balanced analog preamplifier that employs precise dual-channel R2R volume control. This configuration achieves superior DNR and lower THD+N, unlocking the full potential of the music.
 
Three Independent Power Supplies
With three independent toroidal transformers for left channel, right channel, and system power, the DAC-Z10 maintains ultra-low noise down to 42μV. This design minimizes interference, giving each channel its own clean, isolated voltage support for a stable and detailed sound.
 
Dual Independent Channels
Dual Decoding Modules
Built on a fully balanced architecture, the DAC-Z10 features dual independent AK4191 + AK4499 DAC modules for the left and right channels. Combined with AKM’s Velvet Sound™ technology, it strikes the perfect balance between precision and tonal richness.
Native Support
DSD 512
PCM 768kHz/32Bit
Dual Independent Channels
 
R2R Volume Control
The DAC-Z10 employs a precise R2R resistor array for volume control, preserving the original signal at every level. From quiet listening to full volume, every nuance remains intact, delivering clean, accurate, and faithful sound.
 
Fully Balanced Preamplifier
The DAC-Z10 features a high-performance fully balanced preamplifier, supporting both XLR and RCA analog inputs with up to +10dB gain. Paired with a precision R2R analog volume control network, it delivers ultra-low noise and distortion, significantly enhancing dynamic range and signal integrity, allowing every nuance of the music to be reproduced with clarity and authenticity.
 
Eversolo Precision Core™
Accurate Clock System
OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology
External 10 MHz & 25 MHz High-Precision Clock Support | FPGA Clock Reconstruction
 
OCXO Temperature-Controlled Crystal Oscillator
Phase-Locked Loop Technology
The DAC-Z10 integrates an OCXO temperature-controlled crystal oscillator and PLL (Phase-Locked Loop) technology to achieve precise clock reconstruction. Accurate timing is fundamental to high-resolution audio reproduction, and with the stability of the OCXO and the precision of PLL correction, the DAC-Z10 ensures that every note is delivered exactly as intended.
 
Specifications
Basic Parameters
Display:
8.8" IPS
Chassis Material:
Aluminum Alloy
Main Processor:
DCP8568
DAC:
AK4191 + Ak4499 (Both Channels)
Audio Processor:
Multi-core USB audio processor
OPA Chip:
OPA1612
Power:
Triple ultra-low noise linear power supplies
 
Audio Inputs and Outputs:
Bluetooth Audio Input:
Qualcomm QCC5125 Bluetooth module, 
Bluetooth version: BT5.0;
Supports SBC/AAC Bluetooth audio protocols
USB-B Audio Inputs:
Compatible with Windows 10 and above,
macOS, Android, and iOS; supports up to Stereo DSD512 / PCM 768kHz 32Bit
IIS Input:
Supports 8 mode configurations, 
up to stereo DSD512 / PCM 768kHz 32Bit
AES/EBU Input:
Up to Stereo PCM
192kHz / 24Bit / DSD64DoP
Optical Audio Inputs x 2:
Up to Stereo PCM 192kHz / 24Bit / DSD64 DoP
Coaxial Audio Inputs x 2:
Up to Stereo PCM 192kHz / 24Bit / DSD64 DoP
ARC Input:
Up to Stereo PCM 192kHz / 24Bit / DSD64 DoP
Analog Audio Inputs:
XLR (Balanced). RCA
Analog Audio Outputs:
Pre-out: XLR (Balanced), RCA;
Headphone out : 6.35mm single-ended
External Clock Input:
Supports 10M/25M clock inputs with 50Ω or 75Ω impedance
Recommended Headphone Impedance:
16 - 300Ω (Low Gain: 16 - 32Ω / High Gain: 32 - 300Ω)
 
Audio Characteristics:
XLR Output Audio Characteristics:
Output level (Vrms): 5Vrms @ 0dBFS
THD+N @ No-wt: 0.00008% @ 1kHz (-122db @ 1kHz)
Noise @ No-wt: <1.2uVrms
SNR @ A-wt: 130dB
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
Crosstalk: -130dB
DNR @ A-wt: 130dB
 
RCA Output Audio Characteristics:
Output Level (Vrms): 2.5Vrms @ 0dBFS
THD+N @ No-wt: 0.000097% @ 1kHz (-120dB @ 1kHz)
Noise @ No-wt: <1.5uVrms
SNR @ A-wt: 128dB
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
Crosstalk: -123dB
DNR @ A-wt:128dB
 
Headphone Audio Characteristics (Low Gain Mode)
Output Level (Vrms): 4Vrms @ 0dBFS
THD+N @ No-wt: 0.0003% @ 1kHz (-110dB @ 1kHz)
Noise @ No-wt: <2.5uVrms
SNR @ A-wt: 124dB
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
DNR @ A-wt: 124dB
 
Headphone Audio Characteristics (Mid Gain Mode)
Output Level (Vrms): 5.6Vrms @ 0dBFS
THD+N @ No-wt: 0.00018% @ 1kHz (-115dB @ 1kHz)
Noise @ No-wt: <2.5uVrms
SNR @ A-wt: 126dB
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
DNR @ A-wt: 126dB
 
Headphone Audio Characteristics (High Gain Mode)
Output Level (Vrms): 7Vrms @ 0dBFS
THD+N @ No-wt: 0.00013% @ 1kHz (-118dB @ 1kHz)
Noise @ No-wt: <2.5uVrms
SNR @ A-wt: 127dB
Frequency Response: 20Hz - 20kHz (+/-0.1dB)
DNR @ A-wt: 127d
 
Other Information:
Power Supply: AC 110~240V 50/60Hz
USB Port: USB2.0 (only for firmware update)
Control Methods:
Touchscreen Control, Remote Control, Mobile App Control
Rated Power Consumption:
32W
Dimensions:
365mm (L) x 310mm (W) x 88mm (H)
Packing List:
Remote Control
Power Cable
USB Data Cable
USB Drive (for FW upgrade)
Trigger Cable
Polishing Cloth
User Manual