At a glance
Category:
2,5-way Rear Ports
Type:
Floorstander
Connection:
Single Wire
Recommended Amplification:
Minimum: 100 watts. Recommended: 200+ watts into 8 ohms
Recommended Room Size:
20 - 60 m²
FINISHES:
Black or Walnut Burl High Gloss. Custom Color on request.
Why it exists
The TD2.2 Signature was created to combine the seamless coherence of a two-way loudspeaker with the scale, bass authority and ease of a refined floorstander. Its 2.5-way architecture allows both main drivers to support the low frequencies while the upper unit carries the critical midrange, creating a remarkably unified presentation from top to bottom. Signature refinements inspired by the TD3.10 - including an upgraded crossover, improved bass driver, Furutech terminals and IsoAcoustics isolation - allow that musical balance to emerge with even greater freedom and control. TD2.2 Signature is for listeners who want a complete, room-filling TD experience without moving to a physically imposing design. It exists to make high resolution feel natural, tonal richness feel effortless and every kind of music feel entirely at home.
Why it sounds different
TD SERIES
— BASS / MIDRANGE DRIVER - HANDCRAFTED INHOUSE
A five-layer membrane
The TD membrane combines five carefully engineered layers: an aluminium core, ceramic surfaces, tantalum and a final coating of artificial diamond. Each cone carries approximately 1.5 carats of diamond in a layer measuring only 10 microns
Resonances moved beyond the music
The tantalum-and-diamond structure is up to 50 times stiffer than a ceramic-only membrane. Resonances are reduced by 36 dB, while the first breakup mode is raised to 20 kHz, leaving the audible range exceptionally clean.
Absolute control in motion
An N52 neodymium magnet drives an underhung square-wire titanium voice coil with exceptional linearity. The turbine-shaped motor and open basket minimise reflections, while copper-coated pole pieces reduce inductance, delivering bass with speed, authority and precise timing.
Why it sounds different
TD SERIES
— TWEETER- HANDCRAFTED INHOUSE
The ribbon, reimagined
The Raidho planar-magnetic tweeter brings together the best of two worlds: exceptional detail and resolution combined with a smooth, natural musicality. With virtually no distortion or coloration, nothing stands between you and the music.
Greater sensitivity, greater expression
The redesigned construction increases sensitivity by three decibels, giving the tweeter greater freedom to follow the exceptional speed of the TD drivers. From the finest microdynamics to sudden musical peaks, the entire loudspeaker responds as one coherent voice.
Resolution without sharpness
Already minimal distortion has been reduced by a further 35 dB in the TD design. Fine textures, harmonics and spatial information are revealed without hardness or exaggeration, creating exceptional resolution that remains natural.
Specifications
Configuration | 2,5 way |
Dimensions (W×H×D) | 315x1150x505 including feet |
Frequency response | 32Hz - 50 kHz +/-3 dB |
Sensitivity | 88dB 2,83 V/m |
Impedance | {6 Ohm |
Recommended amplifier power | 50 -150 Watts |
Recommended room size | 20 - 60 m² |
Weight | 45 kg / pc. |

